Use our Tool to Build a Custom Pond Kit!

Introducing our innovative custom pond kit builder! It's fully customizable. Simply fill in the fields below, click submit, and scroll down to view your tailored pond kit. We even provide explanations of the fittings needed to connect everything together. If you encounter any errors or issues, please don't hesitate to send us a message!

The Pond Kit Builder is temporarily unavailable. Email us and we'll put a kit together for you.
1. Pond Type:

What type of pond are you building?

Natural ponds look like something you'd find in nature, with an irregular shape, rocks, waterfalls and plants. Formal ponds have clean lines, like perfect rectangles or circles, and are often built from manufactured materials and set into patios. They're not meant to look natural. Pick Pond No Skimmer if there's no room for a skimmer.

How many gallons of water will your pond contain?

Enter your pond's volume in US gallons. Not sure? Use our Pond Volume Calculator.

How many gallons per hour would you like to pump?

This is how many gallons of water your system pumps each hour. As a rule of thumb, we try to pump the whole pond once an hour, so enter the same number as your pond volume. For example, a 2,000-gallon pond would ideally pump 2,000 gallons per hour, especially if it has fish. In larger ponds, or ponds without fish, some people pump the whole pond every two hours instead, which is 1,000 GPH for a 2,000-gallon pond.
4. Pump Type:

Should you use a submersible or an external pump?

Not sure? We recommend submersible pumps for new pond owners: you simply place the pump in the water and turn it on. For more advanced or larger ponds, an external pump uses less power and lasts longer.
5. Filter Type:

Should you use a waterfall filter or an external pressurized filter?

External filters are handy because many have an auto-backflush feature. You'll need somewhere to hide one, though, like a shed or a pump vault. An external pressurized filter also adds about 5 to 10 feet of head pressure, which slows your pump a bit. A waterfall filter hides inside your waterfall and adds very little head pressure.
6. How Serious?

Are you a professional or a hobbyist?

Not sure? Pick Hobbyist: it suits new pond owners and a few goldfish. Pick Professional for koi or other fish that need higher water quality; those kits use pro-level filters.
7. Pipe Length:

How much pipe will you need to connect your pond equipment?

Add up the total pipe run: from your skimmer to your pump, on to your filter, and back to where the water returns to your pond.

How high will your waterfall be?

Enter the elevation gain only: the height from the pond's water surface straight up to where the water spills out at the top of your waterfall or stream. Don't count the distance the water travels back. Round up to whole feet, and enter 0 if there's no waterfall.
Building your kit…

Check out Your Custom Pond Kit!

Email us

This pond is bigger than our kits cover. Email us and we'll put one together.

Goal

Best Match Pump

Click here to see the second best pump details!

Second Closest Match Pump:

This pond is bigger than our kits cover. Email us and we'll put one together.

Can I use different sized pipe?

If you use smaller pipe, the water speed within the pipe will increase, which creates extra friction inside the pipe. Just like when you run your hand along a carpet quickly, the faster the water is running inside the pipe, the more friction you will have. Higher friction translates into higher head pressure, which will result in your pump moving less water through the system. If you increase the pipe size, you will actually have the opposite effect and make your pump more efficient! The pipe size we display is the pipe size we would recommend for this flow rate. If you would like to go larger you can.

What is head pressure?

Head pressure is the force your pump must overcome to pump water through the system. The higher the head pressure, the more your pump will slow down. For example, a pump that pumps 2000 gallons per hour normally may only pump 1500 gph once you connect all your equipment and pump uphill to your waterfall.

For example, if you have a 3-foot-high waterfall, you will add 3 feet of static head pressure to your pumping system. Moving water through pipes and filters also adds head pressure, which they call dynamic head pressure. The kit builder will automatically calculate the head pressure of your system, considering the flow rate, the length of pipe, the type of filter, whether or not there is a UV clarifier, and the height of the waterfall. Believe it or not, there is some actually some pretty heavy math behind these calculations! The kit builder uses current mechanical engineering forumlas to calculate accurate numbers.

Order of Installation / Fittings:

Text Based Version for copy pasting into your notes for later reference.

  • Contact Us

    Real humans standing by via email

  • Free Ground Shipping

    On orders over $99 to the lower 48

  • Quick Turnaround

    Most orders ship fast

  • Ships Across North America

    Canada and the USA