Koi Bottom Drain Pond Kit, 2' Falls, 3000 GPH
Specs
-
Flow Rate: 3000 gph
-
Pump: External
-
Waterfall Height: 2 Feet
-
Waterfall Width: 22"
-
Includes Liner? No
-
Includes Waterfall Spillway? Yes
-
Head Pressure: 13’ - assuming 2’ high waterfall, 2” pipe, 50’ of pipe, 7’ for filter, UV clarifier installed
-
Use 3' rigid pipe from HydroDrain to Sieve
-
If the external pump is below the pond in elevation you can remove the priming pot
-
3" bottom drain works best with a 8' diamater pond but can extend up to a max of 12'
This kit does not include a liner. We recommend our Premium Grade RPE Laminated Liner for free-form shapes, or our Rectangular Box-Welded Liner or Circular Box Welded Liner for formal shapes.
Order of Water Flow / Installation
-
Water enters skimmer and bottom drain
-
Skimmer: water enters, flows through a bulkhead fitting (included with skimmer) into 2" pipe connected to wye fitting
-
Hydro Drain: water enters, flows through 3" ridged PVC to sieve with 3" inlet/outlet
-
3" SPT to 2" slip and 3" coupler to convert to 2" piping which connects to wye fitting 2" slip inlet
-
Wye fitting 2" outlet connects to 2" check valve below water level using a stub of 2" PVC
-
2" piping to priming pot with 2" inlet
-
Priming pot direct connection to pump with 2" FPT inlet
-
2" outlet of pump to PVC adapter 2" MPT to 2" slip
-
Short stub of 2" pipe into 2" PVC union fitting for quick disconnect of pump
-
2" pipe to filter with 2" slip inlet
-
2" pipe to UV clarifier 2" inlet/outlet
-
2" pipe from UV clarifier to waterfall spillway with 2" FPT inlet using a 2" MPT x 2" slip
SKU | KIT-KOI-EP-2f-3000 |
---|