Patch Kit for PolyPro Box Welded Liner - 12" x 12"

$34.99
SKU
PATCHKIT-PP

Includes everything you need to patch a Polypropylene Box Welded Liner. Includes the following:

  • 12 inch x 12 inch patch of EIA liner material
  • 5 feet of waterproof double sided tape
  • 5 feet of waterproof single sided tape

Please note this is only for patching our regular strengrth polypropylene liners. If you purchased the extra strength EIA liner, you will want to get this other patch instead. 

Procedure to patch a liner:

  1. Thoroughly clean the liner and the patch with alcohol so that there is nothing that will affect the adhesion of the tape.
  2. Optional step: if the hole is quite small, you can first cut a 4” x 4” piece of single sided tape and apply it over the area as a last line of defence.
  3. Next, line the peremeter / edge of the 12” x 12” patch with the double sided tape so there are no gaps.
  4. Stick the patch down over the damaged area
  5. Now use the single sided tape to tape the patch down. Do not leave any gaps between pieces of tape.

“A quick note to let you know that I am very happy with the drop in liner that you made for me in August 2019. Been a fun addition to a balcony garden lifestyle in a high density urban townhouse setting. Used classic Japanese burnt cedar siding (‘yakisugi’) for facing on the pool sides. Think it came out quite well for a small, low budget project”

“Your pond liner is great should have water in the next few days and turtles to follow up thank you for your help and amazing product It was well worth it!

"The two most spoiled turtles in America. Basically, a big box made of redwood. Common out here in California. Poured a concrete pad underneath. Wire enclosure due to raccoons is important. Water hyacinth grows like mad. Overall very happy with the liner. No leaks, seams all good. Size was as requested. Will buy again when needed." - W.Fletcher, California, PolyPro

“Box liner was great thanks."  - R.Fall Also purchased underlayment and a fully welded flange.

"After I had the liner mounted I used FlexSeal Liquid Rubber and covered up the aluminum termination bars to hide them....worked great." - J.Binney

J.Martinez_California_Rectangular_Drop_In_Pond_Liner
M.Sanders, California, EIA Pond Liner + All Pond Equipment. "Your awesome and patient customer service is the reason I purchased my new liner from Everything Ponds."
More Information
SKU PATCHKIT-PP